If the headlights on your 2007 Honda Accord have burnt out, it may be time to replace the bulb. It is easy to do, and you can perform the work yourself.
You need to remove the battery on the driver's side to reach the low-beam light bulb. This can be difficult depending on the size of your hands.
How to Remove the Battery
The headlight bulb is an important component of your Honda Accord since it ensures you have a clear vision when driving at night or in poor weather. It is also a safety feature that prevents accidents by making it easier for other motorists to see you. When your 2007 Honda accord headlight bulb goes out, you need to replace it quickly to ensure that you remain safe.
Fortunately, removing the headlight bulbs on your 2007 Honda Accord is relatively easy. The driver-side bulb will be harder to reach since you’ll have to remove the battery, but it is still a simple process.
First, you’ll need a small flat-head screwdriver to remove the three black plastic pop rivets that are located inside the fender well in front of the passenger tire. Once you have these removed, you can then open up the fender well and access the power connector on the low beam headlight bulb’s base.
Once you’ve accessed the power connector, press down on its lower half and pull it away from the headlight bulb’s base. This will allow you to unplug the old low-beam headlight bulb and install a new one.
You should not touch the glass bulb on the new and the best LED headlight bulb because it could damage it. After you replace the bulb, be sure to test it to make sure that it’s working properly.
If you’re not comfortable replacing the headlight bulb on your own, consider bringing it to your local Honda dealer for professional assistance. The staff at Richmond Hill Honda in Ontario, Canada, is highly experienced and will help you get the job done right!
Types of a headlight bulb
The headlight bulb in your 2007 Honda Accord comes in two types: high-beam 9005 and low-beam 9006. You’ll need to purchase the correct type for your car. You can easily find the right type by checking your owner’s manual or using the VIN lookup tool on AutoZone. The bulbs in your 2007 Honda Accord should last for about four years, so you’ll want to change them as soon as possible.
How to Remove the Power Connector
The headlight bulbs might dim and flicker if you have an older Honda Accord. This usually means that they are getting old and need to be replaced. It's also important to replace them before you experience any other problems with your car's headlights since the bulb filament can become damaged and burn out if left untreated.
Easy process to remove the power connector
You must remove the power connector from the light assembly to change the headlight bulb on your 2007 Honda Accord. Fortunately, this relatively easy process should only take about 10 minutes. However, you'll need a Philips screwdriver, a flat-blade screwdriver, wire cutters, and pliers to complete this job.
The replacement process for the headlight bulb on your 2007 Honda accord is similar to replacing other bulbs in your vehicle. Once you have a new bulb in place, you can test it to ensure it works properly before replacing the fender liner and pop rivets.
Replacing the headlight bulb on your 2007 Honda Accord can be a great way to improve visibility on the road. If your old bulb is dimmer or has other problems, you can replace it with a brand-new one that will be more effective and brighter.
Remove the Negative Cable
Headlight bulbs are one of the easiest things to replace in a car. If you’re looking for an easy way to ensure your Honda Accord is running in tip-top condition, headlight bulb replacement might be the solution.
First, you’ll need to remove the negative cable from your Accord. This is typically accomplished by using a 10 mm wrench.
Once you’ve loosened the nut on the negative cable, it will slide off. Be sure to disconnect the negative cable before you connect the positive cable because it’s vitally important to do this in the right order to avoid short circuits.
Once the negative cable is off, it’s time to replace your light bulbs. Thankfully, replacing headlight bulbs on your 2007 Honda Accord is fairly simple.
Remove the Positive Cable
The headlight bulb is a common part of a car's lighting system that can be replaced to increase visibility and extend the lifespan of your vehicle's lights. Luckily, changing out your headlight bulbs on your 2007 Honda Accord is not a difficult DIY project.
The first step is to remove the positive cable from the battery. Typically, this can be done by pulling it away from the battery terminal bolt with a wrench.
Once the battery is removed, the headlight bulb power connector and socket base should be visible. To remove the low beam headlight bulb power connector, push on the plastic tab at the bottom of the plug near the wires and wiggle it until it comes loose.
Next, turn the socket 1/4 turn counterclockwise and pull it straight from the headlight assembly. You'll need a new # 9006 light bulb to replace the low beam headlight bulb.
How to Remove the Bulb
If you're a DIY type and have the proper tools, changing out the headlight bulb on your 2007 Honda Accord is relatively easy. The bulbs on the driver's side are a bit harder to access than those on the passenger side, but it is possible.
The first thing you'll need to do is remove the battery. This can be done either by removing the battery cables or simply pulling up the battery retaining bar to release it.
After removing the battery, you'll need to locate the headlight assembly and gain access to the bulb. It may be hard to find, especially if there are any other components in the way such as an air intake cover. Once you find the assembly, you'll need to remove a couple of screws to gain access.
Once you've gained access to the bulb, it will be easy to remove it. It will have a 90-degree angle to it, so you'll need to grab the right angle and turn the bulb counterclockwise until it comes out.
Read Also: DIY Headlight Bulb Replacement for Your 2015 Nissan Altima
You'll also want to make sure you don't touch the glass part of the bulb with your bare fingers because this can contaminate it and reduce its life. Alternatively, you can use latex exam gloves to avoid the oil from your fingers getting on the new bulb.
Next, you'll need to replace the old bulb with a new one. This is a fairly simple process as long as you know the replacement parts for your car.
Both the low-beam and high-beam headlights have different bulbs, so you'll need to get the right ones for your vehicle.
Conclusion:
After you have the right bulb, you'll need to remove the old one from the socket. You can do this by twisting it a quarter turn counterclockwise until it can be pulled straight out from the socket.
You'll need to replace the bulb in your high and low-beam headlights and your front turn signal/parking light. The passenger side high beam bulb is a bit harder to reach, so you'll need to lift the engine coolant reserve tank off its "stay" to gain access.
FAQs
Can I Replace a Headlight Bulb Myself?
Whether you're doing your maintenance or a DIY job, replacing a headlight bulb is a doable project for most vehicle owners.
Generally speaking, there are three major types of bulbs: halogen (traditional), LED, and Xenon.
What Size Headlight Bulb For 2007 Honda Accord Low Beam?
When the light bulb on your 2007 Honda Accord goes out, you should replace it immediately to ensure your safety.
Having the right car lighting bulbs ensures you can see what's ahead of you when driving at night or in poor weather conditions. OReilly Auto Parts carries a wide selection of car lights for almost every model of Honda Accord on the road today.
How Do You Change a Low Beam Bulb on a Honda Accord?
Your headlights are essential for your safety and visibility on the road, so they should always be working properly.
Replacing your bulbs is one of the easier repairs you can do on your own if you know what you're doing. But be sure to wear vinyl or latex gloves when handling new bulbs, as the oils in your hands can damage them.
Can You Just Put LED Bulbs in the Headlights?
Compared to halogen bulbs, LED headlights last longer and use less power.
But they can be expensive and come with some drawbacks. First, some of them require a lot of wiring and a big heat sink.
Should I Replace the Whole Headlight Or Just the Bulb?
There are two basic kinds of headlights: halogen and xenon. Some drivers prefer halogen because they last longer and produce a more intense beam of light, which helps them see further down the road.
If your headlights are dim or flickering, replace the whole headlight. However, this is only sometimes necessary.
